微信二维码
服务热线:021-22818026

公司新闻

您当前位置:首页 > 新闻中心 > 公司新闻

新旧产品交替通知

来源:捷仕起重机械(上海)有限公司   时间:2018-10-09   

关于瑞士GIS葫芦新旧产品交替的通知

   瑞士总部通知,原第三代GCH1000型葫芦停止生产,升级为新型第四代产品,原型号GCH1000由GP1000 型来替代, 第四代新产品较第三代优点如下:

1、载荷由原来的12.6倍提高到16倍,

2、破断拉力在之前基础上增加7%,

3、原圆形链条升级为7#方形链条,规格为:7.45*23,安全性更高,

4、结构更加紧凑,

5、防护等级IP65,

6、配制双刹车情况下,自带延长盖,

7、接触器采用高端进口奥地利BENEDIKT或瑞士ABB。

 

                                  捷仕起重机械(上海)有限公司

                                                2018-1-8

 

        Notice on the replacement of new and old GIS gourd products in Switzerland

The Swiss headquarters recently informed that the original third-generation GCH1000 gourd was discontinued and upgraded to a new fourth-generation product, and the original GCH1000 model was replaced by the GP1000 model. The fourth-generation new products have the following advantages over the third-generation ones:

 

1. The load was increased from 12.6 times to 16 times.

2.  the breaking tensile force is increased by 7% on the previous basis.

3.  The original circular chain is upgraded to an 7# square chain, with a specification of 7. 7. 45 / 23, which makes it more secure.

4. The structure is more compact,

5.  protection grade IP65,

6.  In the case of double brake, bring your own extended cover

7.The contactor uses high-end imported BENEDIKT from Austria or ABB from Switzerland.

GISCH LIFTING EQUIPMENT (SHANGHAI)CO.,LTD    

2018-01-08

13816673449 021-22818026
咨询热线

扫一扫二维码进入手机微信

aX/eW3ObS1O5x5ledM7tzyu4MxwB7MXCgae00cxgtCvMJHGsvrZmfiR8g4nG+H+XrGwvBHzecwKVu5XIV7OdxQxt52hJTjkIZxndAPPvpsL+tdv15MSGQw==